Skip to content
MSME Security
Dark grey automatic sliding security gate at a commercial site

Commercial cost guide

Automatic gate cost: a commercial budgeting guide

Understand the difference between automating an existing gate and building a complete commercial entrance, with realistic allowances for the work around the gate itself.

  • Free site inspection and quotation
  • Engineer led, no salespeople
  • No callout charges for 3 months after installation

Before you buy

Price the whole entrance, not just the motor

Online prices for gate motors can make automation look deceptively inexpensive. A commercial installation also includes a gate that can withstand frequent use, a suitable foundation or track, power, control equipment and measures that protect people and vehicles from moving parts.

The condition of an existing gate matters as much as its appearance. Bent frames, weak posts, poor alignment or an unsuitable infill can make automation uneconomical. A survey should establish whether refurbishment is sensible before anyone quotes for a motor.

For a new system, opening width, daily cycles, vehicle size and available run-back space all influence the design. The lowest initial price is not necessarily the lowest whole-life cost if the equipment is underrated for a busy depot or difficult to service.

See our commercial automatic gate installation service
Automatic sliding gate and mesh security fencing outside a modern commercial building

Budget guide

Typical automatic gate budget ranges

These planning figures cover common supply and installation scenarios. Unusual foundations, long cable routes and bespoke fabrication can move a project outside them.

Automating a suitable existing gate
£1,800 to £4,500
Motor, control panel and standard safety equipment, assuming the gate and supports are already sound.
New light commercial swing gate
£4,000 to £9,000
A single or pair of gates with automation and straightforward access control on a prepared entrance.
New commercial sliding gate
£8,000 to £20,000
A heavier duty system for a yard or warehouse, with the final allowance depending on span, construction and usage.
Bi-folding or high-use bespoke system
£10,000 to £25,000+
For restricted space, faster operation, frequent cycles or a made-to-measure perimeter design.

Amounts are indicative UK market ranges, exclude VAT and do not represent an MSME Security quotation. Confirm in writing whether groundworks, electrical supply, intercoms, ANPR and making good are included.

Where quotations commonly differ

Two proposals can both describe an automatic sliding gate while covering very different amounts of work. Compare the gate specification and the supporting work line by line rather than focusing on the total alone.

  • Gate construction

    Ask about material, frame size, infill, finish and expected duty. A decorative light gate and a continuously used industrial gate are not equivalent products.

  • Ground and support work

    Concrete bases, posts, track beams, drainage and ducting can be substantial items, particularly where levels or underground services complicate the entrance.

  • Power and communication

    Establish who installs the electrical supply and how an intercom or remote connection reaches the gate. Trenching over a long distance can change the budget considerably.

  • Control and safety

    Check exactly which readers, safety edges, photocells, vehicle loops, emergency controls and manual release arrangements are allowed for.

How gate type affects value

A sliding gate needs clear space alongside the opening but does not sweep through the vehicle lane. It is often appropriate for wide industrial entrances, although a tracked version needs a level and well-drained foundation. Cantilever designs avoid a track across the roadway but require additional run-back space.

Swing gates can use less hardware at smaller entrances, yet they need an unobstructed arc and firm support posts. Bi-folding leaves reduce the space and opening time required, but introduce more moving components. Choose around the site geometry and traffic pattern, not a generic rule that one format is always best.

Wind exposure, gradients and pedestrian routes also deserve attention during design. A solid infill can behave differently from open mesh, and a separate pedestrian entrance may avoid people walking through a powered vehicle gate.

A sensible way to compare gate quotes

Give every installer the same information about opening hours, vehicle types, approximate daily movements and who needs access. Explain how deliveries and visitors should be handled, and identify any existing fencing, cameras or door control that the gate needs to work with.

Request a written scope covering removal of old equipment, making good, commissioning, user training and documentation. Ask how the gate behaves during a power cut and what routine servicing involves. A clear handover and accessible manual release are practical necessities, not optional finishing touches.

  • Measure the clear opening and the space available for the gate to move.
  • List staff, visitor and HGV access requirements separately.
  • Check the allowance for safety testing and future inspection.
  • Confirm warranty terms, response arrangements and the cost of routine maintenance.

FAQs

Automatic gate cost: frequently asked questions

Is it cheaper to automate an existing commercial gate?

Usually, provided the gate, hinges or running gear and support posts are suitable. Repairs or strengthening can reduce the saving, so the structure should be assessed before choosing this route.

Does ANPR come as standard with an automatic gate?

No. Number plate recognition, intercoms and networked access control are separate parts of the specification. Ask for each option and its recurring software or connectivity costs to be shown clearly.

Why can groundworks cost so much?

The entrance may need excavation, reinforced concrete, drainage, ducts and a level track or substantial posts. Surfacing, restricted access and buried services add further variation.

Should maintenance be included in the budget?

Yes. Ask for the expected service interval and an annual maintenance allowance, along with any safety checks recommended for the way your gate is used.

Can I get an accurate automatic gate price without a survey?

A broad allowance is possible from dimensions and photographs, but a reliable quotation needs the structure, levels, power route, traffic and safety risks to be inspected.

Planning a new automatic gate?

Arrange an engineer-led inspection of the entrance, existing structure and access requirements before fixing your budget.

Free site inspection

Request an automatic gate quotation

Share your location, approximate opening width and whether you have an existing gate. We will arrange a free site inspection.

Call Chase Dobbie and the team01332 492002

Or email info@msmesecurity.co.uk

  • Monday to Friday: 9am to 6pm
  • Saturday and Sunday: 11am to 5pm

Fields marked * are required. We only use your details to respond to your enquiry.

Call nowGet a quote